Maldistribution in air–water heat pump evaporators. Part 1: Effects on evaporator,heat pump and system level

This paper presents an approach to quantify the effect of evaporator maldistribution on operating costs of air–water heat pumps. In the proposed simulation model maldistribution is induced by two parameters describing refrigerant phase and air flow distribution. Annual operating costs are calculated based on heat pump performance at distinct operating conditions. Results show that percentage increase of operating costs is similar for the three considered climate zones, even though the effect of maldistribution on heat pump performance varies with operating conditions. Differences in terms of absolute cost increase for the climate zones arise mainly due to a varying number of operating hours. Absolute cost increase is considerable in the average and especially colder climate zone and can only partly be reduced by enlarging the evaporator.     

Dual-loop self-optimizing robust control of wind power generation with Doubly-Fed Induction Generator

This paper presents a self-optimizing robust control scheme that can maximize the power generation for a variable speed wind turbine with Doubly-Fed Induction Generator (DFIG) operated in Region 2. A dual-loop control structure is proposed to synergize the conversion from aerodynamic power to rotor power and the conversion from rotor power to the electrical power. The outer loop is an Extremum Seeking Control (ESC) based generator torque regulation via the electric power feedback. The ESC can search for the optimal generator torque constant to maximize the rotor power without wind measurement or accurate knowledge of power map. The inner loop is a vector-control based scheme that can both regulate the generator torque requested by the ESC and also maximize the conversion from the rotor power to grid power. An ℋ_∞ controller is synthesized for maximizing, with performance specifications defined based upon the spectrum of the rotor power obtained by the ESC. Also, the controller is designed to be robust against the variations of some generator parameters. The proposed control strategy is validated via simulation study based on the synergy of several software packages including the TurbSim and FAST developed by NREL, Simulink and SimPowerSystems.     

搪瓷承压水箱在空气源热泵中实际运用研究

随着经济的快速发展，人们的生活水平得到了显著的提升，由此，人们对生活的质量就有了更高的要求，尤其是对热水的要求，更是出现了显著的提升。当前，国内的空气源热水器行业发展的十分迅速，能够充分地满足人们对热水的需求，这使得空气源热泵在人们的生活中应用的越来越广泛。在本文中，介绍了空气源热泵的工作原理以及优点，并介绍了搪瓷承压水箱在空气源热泵中的实际应用。     

新型低GWP高温热泵工质HFO-1234ze(Z)的研究进展

高温热泵可以有效回收工业余热，达到节能减排和保护环境的目的。目前，有关高温热泵技术的研究热点在于寻找一种全球变暖潜能值(GWP)低、使用性能良好的工质，以替代现有CFC-114、HFC-245fa工质。对新型环境友好型工质HFO-1234ze(Z)进行了综述，其GWP＜1，临界温度高于423 K，是一种潜在的高温热泵替代工质。总结了近年来国内外学者对HFO-1234ze(Z)的合成技术、热力学性质、输运性质、传热性能等方面的研究，并分析了HFO-1234ze(Z)在高温热泵系统中应用的可行性，认为HFO-1234ze(Z)在高温热泵中具有较好的工作性能和发展前景。     

Triple hybrid system coupling fuel cell with wind turbine and thermal solar system

One of the most challenging issues in the domain of renewable energy is the instability of produced power. To put it another way, renewable resources such as solar energy cannot provide continuous energy supply because they rely on natural phenomena that vary randomly. That said, to cover the potential lack of energy that may occur, hybrid renewable energy system can be adopted. In other terms, instead of using single renewable energy source, two different sources can be utilized in order to optimize the output power all over the year. Furthermore, complementary energy system is needed along with renewable sources, to store energy and insure the supply during shortage period. With this in mind, a Green-Green energy system can be constructed by using green storage system such as Fuel Cell to be coupled with the renewable sources. In the light of green-green energy concept, the present paper examines a triple wind-solar-fuel cell combination in the aim of overcoming the energy shortage that occurs during several months of the year. A case study on the region of Dahr Al-Baidar in Lebanon is conducted to present the advantage of the proposed system. Results show that combining wind energy system with thermal solar system allows overcoming the low power produced by solar thermal system especially in winter. For illustration 16 kW are produced by wind turbine during the month of January, by contrast the thermal solar system provides 2 kW during the same period. Nevertheless, in June thermal solar offers 17 kW and wind turbine produces 11 kW.     

小型NaK热真空电磁泵热控措施影响分析

热真空电磁泵是一种在热真空环境条件下使用的高温电磁泵，换热途径的缺失使得设备整体温度很高，高温会使结构和功能材料的性能剧烈下降。本文采用数值计算方法对中国原子能科学研究院研制的小型NaK热真空电磁泵内构件温度分布进行了计算。结果表明：在泵沟外壁采用真空隔热屏、气密腔室内外壁喷涂黑体涂层的热控措施行之有效，降低了设备内构件尤其是励磁线圈的温度，提高了设备的使用寿命。     

内含实体对H型垂直轴风力机气动性能的影响

以H型垂直轴风力机及其内含圆柱形实体为研究对象,对NACA0018翼型的五叶片H型垂直轴风力机的气动性能进行数值模拟和实验验证。分析8种不同直径的内含圆柱体,在内含实体截面积占风轮迎风面积之比分别为21.2%、50.0%和76.9%时,风力机风能利用率的峰值分别下降8.04%、20.7%及74.3%。结果表明：随着内含实体直径的增大,风能利用率的峰值逐渐减小,开始较为缓慢,达到一定值时快速下降。小直径内含实体主要影响叶片在下风区的转矩,对风能利用率的影响较小,而大直径内含实体还会影响叶片在上风区的转矩,其风能利用率迅速减小。对于内含固定直径的实体,比如在现有建筑物外侧安装风力机时,其风轮半径的选择需综合考虑风能利用率和风力机的建造成本两方面的因素。研究结果可为建筑物与垂直轴风力机进行有效结合以提高风能的利用提供参考。     

Comparison of the dynamic responses of monopiles and gravity base foundations for offshore wind turbines in sand using centrifuge modelling

Monopiles and gravity base foundations (GBF) are two of the most commonly used foundations for offshore wind turbines. As resonance can cause damage and even failure of wind turbines, understanding the difference between the dynamic responses of monopiles and GBFs under free vibration is important. However there is little experimental data regarding their natural frequency, especially from model tests carried out at correct stress levels. This paper presents the results of novel monopile and GBF tests using a centrifuge to directly determine the natural frequency (f_n) of the foundation-soil system. The natural frequencies of wind turbine monopiles and GBFs in centrifuge models were measured during harmonic loading using a piezo-actuator, with the results confirming that soil-structure interaction must be considered to obtain the system’s natural frequency as this frequency reduces substantially from fixed-base values. These results will contribute in preventing resonance induced damage in wind-turbines.     

提升机启动操作中制动油泵软性停转的分析与排除

同一个多功能集控器件长期使用后，其不同故障程度对应有不同故障现象，为了加快现场技术管理人员对提升机疑难故障的有效排除进度，着重分析了制动油泵停转的控制通道，根据提升机启动操作中制动油泵停转后的排查处理结果，圈定了故障范围为变频控制器件。制动油泵在提升机启动操作中停转的不确定性，查找故障时整机电控系统处于非故障状态，接近更换变频主控板D6时启动提升机操作中制动油泵软性停转次数有所增多、启动中无发生制动油泵停转的全程提升未见异常，上述因素使制动油泵软性停转成为疑难杂症。故障现象恶化为每次操作至制动手把推向松闸位置制动油泵均停转，用梯形图确定D6故障是症结所在。对D6的自身故障精确定位功能且在变频控制柜人机界面RJ2显示故障信息认识不足，导致故障长时存在。此副井提升机有关人员应做到:对故障反映到位、深刻了解器件性能特征、透析有关动作过程后方可采取针对性措施、确定故障元件、最终排除故障。可恢复性的轻故障发生后必须采取相应措施，避免故障扩大导致停机延误提升。将变频就绪与故障的实时信息显示于司控台面，弥补了技改缺陷。     

船用淡水泵泵轴开裂的仿真分析及改进

针对某船用淡水泵泵轴开裂故障，建立泵轴有限元模型，并采用应力-疲劳理论和线性累积损伤模型，基于安全系数法分析了泵轴的高周疲劳损伤。结果表明:泵轴键槽为结构疲劳薄弱区域，疲劳安全系数不足导致键槽处产生疲劳裂纹,裂纹扩展,直至开裂失效。仿真和试验验证表明:取消键槽并加大轴径的改进措施成效显著；泵轴的疲劳安全系数得到提高，满足材料的许用要求。